Academic Year: 2018-19
S.No. | Name of the faculty | Title of the paper | Journal/Conference- Details of Journal in which paper has been published (include ISSN) | Cited in UGC/Web of Science/Scopus/SCI/SCIE |
---|---|---|---|---|
1 | Dr. J. Kanna Kumar | Construction and operation of Ornithopter | International Journal of Technologies and innovative Research. , Vol. 6, JAN 2019 | Scopus Indexed |
2 | J. Ramesh | Fabrication of Smart Cultivation System | Journal of Emerging Technologies and Innovative Research, Vol. 6, issue. 6, June 2019, pp. 301-303 | UGC |
3 | Design and Thermal analysis of Heat Exchanger Tubes using ANSYS | International Journal for Science and advanced Research in Technology, Vol. 5, issue. 5, May 2019, pp. 745-749 | ||
4 | Desalination of Water using a Passive Conventional Solar still | Journal of Emerging Technologies and Innovative Research, Vol. 6, issue. 6, June 2019, pp. 301-303 | ||
5 | M. Naga Kiran | Design and Analysis of Wind Turbine Bade | International Journal of Research,(IJR), e-ISSN: 2348-6848,p-ISSN: 2348-795X,Volume 05,Issue-22, November 2018, Page No:891-894 | UGC |
6 | Design and Analysis of Aerofoil Shaped Propeller Blades Used In Ships Using FEA | International Journal of Research,(IJR), e-ISSN: 2348-6848,p-ISSN: 2348-795X,Volume 05,Issue-22, November 2018, Page No:959-967 | UGC | |
7 | Construction and operation of Ornithopter | Journal of Engineering Technologies and Innovative Research(JETIR),UGC Approved, ISSN-2349-5162, Volume 6, Issue 1, January 2019, Page No:109-119 | UGC | |
8 | K. Sagar Kumar | Fabrication of Smart Cultivation System | International Journal for Research in Applied Science & Engineering Technology, Vol. 7, issue. 6, June 2019, pp. 1711-1714. | UGC |
9 | A. Salmon | Design and Analysis of Aerofoil Shaped Propeller Blades Used In Ships Using FEA | International Journal of Research,(IJR), e-ISSN: 2348-6848,p-ISSN: 2348-795X,Volume 05,Issue-22, November 2018, Page No:959-967 | UGC |
10 | Construction and operation of Ornithopter | Journal of Engineering Technologies and Innovative Research(JETIR),UGC Approved, ISSN-2349-5162, Volume 6, Issue 1, January 2019, Page No:109-119 | ||
11 | S.M Girish Kumar | Fabrication of Smart Cultivation System | International Journal for Research in Applied Science & Engineering Technology, Vol. 7, issue. 6, June 2019, pp. 1711-1714. | UGC |
12 | B. Melina Queen | Design and Thermal analysis of Heat Exchanger Tubes using ANSYS | Journal of Emerging Technologies and Innovative Research, Vol. 6, issue. 6, June 2019, pp. 301-303 | UGC |
13 | G. Mallikarjuna | Fabrication of Smart Cultivation System | International Journal for Research in Applied Science & Engineering Technology, Vol. 7, issue. 6, June 2019, pp. 1711-1714. | UGC |
Academic Year: 2017-18
S.No. | Name of the faculty | Title of the paper | Journal/Conference | Cited in Scopus/SCI/SCIE |
---|---|---|---|---|
1 | N. Anantha Krishna | Design thinking plausible ancient Indian Alchemical tropical drug mechanism for healing wounds | a mechanistic approach, International journal of Engineering science Invention,Vol 7, Issue 2, Feb 2018 | UGC |
2 | A Critical review on Ancient Alchemical Metal Treatment Procedures in Rasagrandhas and Brhadvimanika Shastra | Elsevier, Materials Today Proceedings | UGC | |
3 | Synthesis, Characterization and antimicrobial activity of Fermented fruit juice mediated copper powder: A traditional approach | Journal of Pharmacy Research,Vol.11, Issue 11, Nov 2017 | ||
4 | S.M. Girish Kumar | Unitary Air Conditioning | accepted and published in International Journal of Scientific Engineering and Technology Research in Engineering and Technology (IJSETR), ISSN:2319-8885, Vol.07,Issue.04, April-2018, Pages:0821-0825 | UGC |
5 | M. Jayaramudu | Design and Analysis of 2 Wheeler Connecting | International Journal of Research,(IJR), e-ISSN: 2348-6848, p-ISSN: 2348-795X, Volume 04 Issue-17, December 2017, UGC Approved Journal Sr.No:44396, Page No:2171-2175 | UGC |
6 | G. Mallikarjuna | FINITE ELEMENTANALYSIS OF BOILER SHELL WITH RIVETED JOINTS USING CATIA AND ANSYS, | ISSN 2454 – 535X www.ijmert.com Vol. 3, No. 4, November 2017 © 2017 IJMERT | UGC |
7 | M. Naga Kiran | Design and analysis of shaft driven bicycle | International Journal of Research,(IJR), e-ISSN: 2348-6848, p-ISSN: 2348-795X, Volume 04 Issue-17, December 2017, UGC Approved Journal Sr.No:44396, Page No:1951-1954 | UGC |
8 | Design and Analysis of 2 Wheeler Connecting | International Journal of Research,(IJR), e-ISSN: 2348-6848, p-ISSN: 2348-795X, Volume 04 Issue-17, December 2017, UGC Approved Journal Sr.No:44396, Page No:2171-2175 | UGC | |
9 | Design and Analysis of an Aluminium Die Casting Die for a Compressor Rotor Design and Analysis of 2 Wheeler Connecting | International Journal of Research,(IJR), e-ISSN: 2348-6848, p-ISSN: 2348-795X, Volume 05 Issue-16, June 2018,Impact Factor 5.60, UGC Approved Journal Sr.No:44396, Page No:307-311 | UGC | |
10 | A.Salmon | Design and analysis of shaft driven bicycle | International Journal of Research,(IJR), e-ISSN: 2348-6848, p-ISSN: 2348-795X, Volume 04 Issue-17, December 2017, UGC Approved Journal Sr.No:44396, Page No:1951-1954 | UGC |
11 | Design and Analysis of 2 Wheeler Connecting | International Journal of Research,(IJR), e-ISSN: 2348-6848, p-ISSN: 2348-795X, Volume 04 Issue-17, December 2017, UGC Approved Journal Sr.No:44396, Page No:2171-2175 | UGC | |
12 | Design and Analysis of an Aluminium Die Casting Die for a Compressor Rotor Design and Analysis of 2 Wheeler Connecting | International Journal of Research,(IJR), e-ISSN: 2348-6848, p-ISSN: 2348-795X, Volume 05 Issue-16, June 2018,Impact Factor 5.60, UGC Approved Journal Sr.No:44396, Page No:307-311 | UGC | |
13 | P. Sagar | Development & Comparison of Polymer Hybrid Composites Reinforced with Glass, Sisal, & Jute Fibers | International Journal of Research e-ISSN: 2348-6848 p-ISSN: 2348-795X Volume 04 Issue 14. November 2017 | UGC |
Academic year 2016 -17
S.No | Name of the Faculty | Title of Publication | Journal/Conference -Details of Journal in which paper has been published | UGC | |
---|---|---|---|---|---|
1 | J. Ramesh | A Theoritical Investigation on the analysis of a Thermal Power Plant Working on Rankine Cycle | International Journal of Innovative Research in Science, Engineering and Technology, Vol. 5, Issue. 8, August 2016, pp. 15369-77 | UGC | |
2 | Fabrication and Performance Evaluation of a Flat Plate Solar Collector Water Heater | International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue. 4, April 2017, pp. 5293-5299 | UGC | ||
3 | Water Purification using a fabricated double slope type solar still with external reflecting mirrors | International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue. 5, May 2017, pp. 7484-7490 | UGC | ||
4 | N. Anantha Krishna | Reverse Engineering ancient Cu based drugs, their synthesizing methods and evaluation using vedic mind tools | Drug invention today ,Vol 9, issue 3, march 2017 | UGC | |
5 | Formulation and Evaluation of Nano Copper Gel for Treatment of Clinical Mastitis | Journal of Pharmacy Research, Vol.11, Issue 5, May 2017.
| UGC | ||
Synthesis, Charecterization and antimicrobial activity of Fermented fruit juice mediated copper powder: A traditional approach | Journal of Pharmacy Research,Vol.11, Issue 11, Nov 2017 | UGC | |||
6 | |||||
7 | S.M Girish Kumar | Design and Analysis of Chain Drive | accepted and published in International Journal of Core Engineering and Management (IJCEM), NCETME- 2017 - ISO 2348: 9510, Page No 251 – 263 | UGC | |
8 | Processing Of Aluminium Based Metal Matrix Composites | accepted and published in International Journal of Core Engineering and Management (IJCEM), NCETME- 2017 - ISO 2348: 9510 , Page No 341 – 348 | UGC | ||
9 | M. Naga Kiran | Modelling and Structural Analysis of a Pressure Hull under Dynamic Load ” | accepted and published in International Journal of Scientific Research in Science and Technology (IJSRST), Print ISSN: 2395-6011, Online ISSN: 2395-602X, Volume 2 , Issue 4, August 2016 , Page No 167 - 172.
| UGC | |
10 | Design and Analysis of a Camera Jib Crane | accepted and published in International Journal of Engineering Trends & Advanced Sciences (IJETAS), Volume 1, Issue 3, September 2016, Page No 131 – 139 | UGC | ||
11 | Design and Analysis of a Camera Jib Crane | accepted and published in International Journal of Scientific Research in Mechanical and Materials Engineering (IJSRMME), Volume 1, Issue 1, September 2016, Page No 35 – 42 | UGC | ||
11 | Micromechanical Analysis of a FRP Composite | accepted and published in International Journal of Scientific Research in Mechanical and Materials Engineering (IJSRMME), Volume 1, Issue 1, October 2016, Page No 28 – 34 | UGC | ||
12 | Modeling& Impact Analysis of a Car Bumper with Different Loads on Different Materials | accepted and published in International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET),ISSN(Online) : 2319-8753,ISSN (Print) : 2347-6710, Volume 5, Issue 11 , November 2016 , Page No 19260-19264 | UGC | ||
13
| Modeling and Analysis of Cylinder Block by Carbon Material (FU4270) for V8 Engine | accepted and published in International Journal of Engineering Trends and Applications (IJETA), ISO 3297: 2007 , ISSN 2393 – 9515, Volume 4, Issue 1, January 2017, Page No 1 – 4 | UGC | ||
14 | Co-Generated Bike | accepted and published International Journal of Scientific Research in Engineering (IJSRE), Volume 1, Issue 2, February 2017, Page No 44 – 52 | UGC | ||
15 | Mechanical Performance and Analysis of Banana Fiber Reinforced Epoxy Composites | International Journal of Scientific Research Engineering & Technology (IJSRET), ISSN 2278 – 0882,Volume 6, Issue 5, May 2017, Page No 440-444 | UGC | ||
16 | Dr. J. Kanna Kumar | A Theoritical Investigation on the analysis of a Thermal Power Plant Working on Rankine Cycle | International Journal of Innovative Research in Science, Engineering and Technology, Vol. 5, Issue. 8, August 2016, pp. 15369-77 | UGC | |
17 | Fabrication and Performance Evaluation of a Flat Plate Solar Collector Water Heater | International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue. 4, April 2017, pp. 5293-5299 | UGC | ||
18 | A. SALMON | Modeling and Analysis of Cylinder Block by Carbon Material (FU4270) for V8 Engine | accepted and published in International Journal of Engineering Trends and Applications (IJETA), ISO 3297: 2007 , ISSN 2393 – 9515, Volume 4, Issue 1, January 2017, Page No 1 – 4 | UGC | |
19 | Co-Generated Bike | accepted and published International Journal of Scientific Research in Engineering (IJSRE), Volume 1, Issue 2, February 2017, Page No 44 – 52 | UGC | ||
20 | Co-Generated Bike | accepted and published Journal of Automotive Engineering & Technology (ManTech Publications), Volume 2, Issue 1, March 2017, Page No 1 – 1 | UGC | ||
21 | G. SIVA KUMAR | Co-Generated Bike | accepted and published International Journal of Scientific Research in Engineering (IJSRE), Volume 1, Issue 2, February 2017, Page No 44 – 52 | UGC | |
22 | Co-Generated Bike | accepted and published Journal of Automotive Engineering & Technology (ManTech Publications), Volume 2, Issue 1, March 2017, Page No 1 – 1 | UGC |